-40%
DAMAGED: Dayton Direct Drive Blower Motor 4YU34, 115V, 1550 RPM, for Ventilator
$ 31.65
- Description
- Size Guide
Description
Never fully installed, however the low speed setting doesNOT
work; only the medium and high speed lines function properly. The red/low speed line is open. In addition, there is some noise and vibration present when the motor is running. Actual item for sale pictured.
Technical Specifications
Direct Drive Blower Motor
Motor Application: HVAC/R
Motor Sub Application: Direct Drive Fan/Blower
Phase: Single
Motor Design: Permanent Split Capacitor
HP: 1/8
Nameplate RPM: 1,550/1,300
Number of Speeds: 3
Voltage: 115V AC
Full Load Amps: 2.6
Frame: 42Y
Replacement For:
4YC66
4YC67
5DVP6
5DVP7
Usable @ 208V: No
Usable @ 200V: No
Motor Thermal Protection: Auto
Hz: 60
Motor Service Factor: 1
Insulation Class: A
Motor Shaft Rotation: CCWSE
Maximum Ambient Temperature: 40° C
Duty Cycle: Continuous
Motor Enclosure Design: Open Air-Over
Motor Mounting Type: Stud
Motor Mounting Position: All Angle
Number of Shafts: 1
Shaft Diameter: 1/2"
Shaft Length: 2-3/4"
Motor Bearings: Ball
Motor Shaft Design Flat
Length Less Shaft: 3-5/8"
Mounting Holes: (4) #10-32
Body Diameter: 5-1/8"
Stud Quantity: 4
Mounting Stud Pattern: 2-3/4" x 2-3/4"
Bolt Circle Diameter: 3-7/8"
Mounting Stud Location: Shaft End
Stud Size: #10-32
Standards: CSA Certified (LR43381), CSA Certified Motor, UL Recognized: (E62788/E62862)
Capacitor Required: Yes
Includes: Mounted 5 MFD 370VAC Capacitor
MSRP: 7.28